Comodo SAN Multi domain SSL Certificate Installation

-

Preview:

1.      We shall have 4 files.

2.      commercial.csr, commercial.key, commercial.crt, commercial_ca.crt

3.      commercial.csr and commercial.key will be present in the server (location: /opt/zimbra/ssl/zimbra/commercial/).

 

Instruction:

 

1.      From the SSL vendor we may receive a zip file that contains 2 files.

 

2.      These files will be:

ABC.crt                   [contains 1 certificate]

ABC.ca-bundle       [contains 2 certificates]

 

3.      ABC.crt contains 1 security certificate.

 

4.      ABC.ca-bundle contains 1 root certificate & 1 intermediate certificate.

 

5.      We need to composite ABC.crt & ABC.ca-bundle and another security key file to get below mentioned files:

a.       commercial.crt

b.      commercial_ca.crt

 

6.      All above mentioned files shall be placed in the below mentioned location:

/opt/zimbra/ssl/zimbra/commercial/

 

7.      All files shall have ownership of zimbra as like:

-rw-r----- 1 zimbra zimbra 5644 Jan 10 23:40 commercial_ca.crt

-rw-r----- 1 zimbra zimbra 7754 Jan 10 23:44 commercial.crt









8.      Please avail below table to referring to the composition:

 

File Name

Content based on order

No. of key

Total no. of key


commercial_ca.crt

ABC.ca-bundle

2


3

Security Key from COMODO

1



commercial.crt

ABC.crt

1



4

ABC,ca-bundle

2

Security Key from COMODO

1


  9.      Format of these files shall be as mentioned below:

-----BEGIN CERTIFICATE-----

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

-----END CERTIFICATE-----


  10.  Now we have 3 files i.e commercial.key, commercial.crt & commercial_ca.crt


11.  Now use below commands to verify them:

zimbra@mail:~/ssl/zimbra/commercial$ /opt/zimbra/bin/zmcertmgr verifycrt comm /opt/zimbra/ssl/zimbra/commercial/commercial.key /opt/zimbra/ssl/zimbra/commercial/commercial.crt /opt/zimbra/ssl/zimbra/commercial/commercial_ca.crt

  We should get output of matching notification and a OK. Example:

 

** Verifying '/opt/zimbra/ssl/zimbra/commercial/commercial.crt' against '/opt/zimbra/ssl/zimbra/commercial/commercial.key'

Certificate '/opt/zimbra/ssl/zimbra/commercial/commercial.crt' and private key '/opt/zimbra/ssl/zimbra/commercial/commercial.key' match.

** Verifying '/opt/zimbra/ssl/zimbra/commercial/commercial.crt' against '/opt/zimbra/ssl/zimbra/commercial/commercial_ca.crt'

Valid certificate chain: /opt/zimbra/ssl/zimbra/commercial/commercial.crt: OK

zimbra@mail:~/ssl/zimbra/commercial$

 

12.   If everything is okay, then use below commands to install the certificate:

zimbra@mail:~/ssl/zimbra/commercial$ /opt/zimbra/bin/zmcertmgr deploycrt comm /opt/zimbra/ssl/zimbra/commercial/commercial.crt /opt/zimbra/ssl/zimbra/commercial/commercial_ca.crt

  Is this case, we will get output as mentioned below:


** Keeping first certificate in '/opt/zimbra/ssl/zimbra/commercial/commercial.crt'

** Verifying '/opt/zimbra/ssl/zimbra/commercial/commercial.crt' against '/opt/zimbra/ssl/zimbra/commercial/commercial.key'

Certificate '/opt/zimbra/ssl/zimbra/commercial/commercial.crt' and private key '/opt/zimbra/ssl/zimbra/commercial/commercial.key' match.

** Verifying '/opt/zimbra/ssl/zimbra/commercial/commercial.crt' against '/opt/zimbra/ssl/zimbra/commercial/commercial_ca.crt'

Valid certificate chain: /opt/zimbra/ssl/zimbra/commercial/commercial.crt: OK

** Appending ca chain '/opt/zimbra/ssl/zimbra/commercial/commercial_ca.crt' to '/opt/zimbra/ssl/zimbra/commercial/commercial.crt'

** Importing cert '/opt/zimbra/ssl/zimbra/commercial/commercial_ca.crt' as 'zcs-user-commercial_ca' into cacerts '/opt/zimbra/common/lib/jvm/java/lib/security/cacerts'

** NOTE: restart mailboxd to use the imported certificate.

** Saving config key 'zimbraSSLCertificate' via zmprov modifyServer mail.domain.com...ok

** Saving config key 'zimbraSSLPrivateKey' via zmprov modifyServer mail.domain.com...ok

** Installing imapd certificate '/opt/zimbra/conf/imapd.crt' and key '/opt/zimbra/conf/imapd.key'

** Copying '/opt/zimbra/ssl/zimbra/commercial/commercial.crt' to '/opt/zimbra/conf/imapd.crt'

** Copying '/opt/zimbra/ssl/zimbra/commercial/commercial.key' to '/opt/zimbra/conf/imapd.key'

** Creating file '/opt/zimbra/ssl/zimbra/jetty.pkcs12'

** Creating keystore '/opt/zimbra/conf/imapd.keystore'

** Installing ldap certificate '/opt/zimbra/conf/slapd.crt' and key '/opt/zimbra/conf/slapd.key'

** Copying '/opt/zimbra/ssl/zimbra/commercial/commercial.crt' to '/opt/zimbra/conf/slapd.crt'

** Copying '/opt/zimbra/ssl/zimbra/commercial/commercial.key' to '/opt/zimbra/conf/slapd.key

 

13.   Finally, when the certificate installation is successful, we shall restart zimbra services.


            14.  At the end we can check the certificate status from any reputed browser (i.e. Firefox,         Chrome, Opera etc.)

Comments

Post a Comment

Popular posts from this blog

Disabling Zimbra's AntiSpam, Amavis and AntiVirus filtering

-
 Check whether antispam and antivirus service is enabled currently on server using the given command zmprov -l gs <mail.example.com> | egrep -i 'serviceen|servicein'  The above command will list all the services which are currently installed and enabled on the server. Disable the antivirus and antispam services using the given commands zmprov -l ms <mail.example.com> -zimbraServiceEnabled antispam  zmprov -l ms <mail.example.com> -zimbraServiceEnabled amavis zmprov -l ms <mail.example.com> -zimbraServiceEnabled antivirus  Comment the following line in the file /opt/zimbra/postfix/conf/main.cf content_filter = smtp-amavis:[127.0.0.1]:10024  Restart services on server zmcontrol restart  Confirm that the antispam and antivirus services are disabled with the given command zmprov -l gs <mail.example.com> | egrep -i 'serviceen|servicein'  zmcontrol status 
Read more

Cambium cnPilot E400/E410/E500 Configuration Tutorial

-
Image
Basic Connectivity:   Router (Broadband/mikrotik |dhcp enabled) >>> E400/E410/E500 + LAPTOP Cambium (Powered ON) [POE port] >>>> LAPTOP [LAN port] Step 1: Open Cambium controller in the browser. Step 2: After entering in to the site click on the Onboard Device option from Home Tab of Left Panel. Step 3: In the Onboard Option, we will get Claim Device option to adopt a Cambium AP. Step 4: Now we will move to the Cambium AP configuration Part. Below are credentials of default login access of cnpilot E400/E410/E500/E410/E500. IP:192.168.0.1 Command Line Access: Username: admin Telnet: Disabled by default Password: admin SSH: Enabled by default (on standard port: 22) ***We can also use dhcp IP to login to the cnpilot E400/E410/E500. We will get login page. Step 5: We can see several TAB on left panel. On the DashBoard Tab, we will get some overall information. Some are useful for the configuration; some are useful for troubleshoo...
Read more

Error "Unable to retrive Zimbra GPG key for package validation"

-
From the installation log we see: Executing: /tmp/tmp.mSlzRMclVa/gpg.1.sh --keyserver keyserver.ubuntu.com --recv-keys 9BE6ED79 gpg: requesting key 9BE6ED79 from hkp server keyserver.ubuntu.com gpg: keyserver timed out gpg: keyserver receive failed: keyserver error 1. Open port 11371 11371 tcp,udp hkp OpenPGP HTTP Keyserver 2. Force it to use port 80: gpg --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys 9BE6ED79 Ref: https://wiki.zimbra.com/wiki/Error_%22Unable_to_retrive_Zimbra_GPG_key_for_package_validation%22
Read more