How to Restrict Sending to Distribution list in zimbra mail

-

Step 1: if you have not distribution list, you can create distribution list as bellow.

$zmprov cdl dltest@huuphan.local
Add a member to a distribution list. Tip: You can add multiple members to a list from the administration console:
$zmprov adlm dltest@drbdtest.com sharif@drbdtest.com
$zmprov adlm dltest@drbdtest.com saikat@drbdtest.com


Step 2: To enable milter services, two way


 From administration console to enable milter services
How to Restrict Sending to Distribution list in zimbra mail

To use command line to enable milter services.
$zmprov ms `zmhostname` zimbraMilterServerEnabled TRUE
$zmmailboxdctl restart
$zmmtactl restart
$zmcontrol status
$zmmilterctl start

The only list member can sending mail to dltest@huuphan.local
$zmprov grr dl dltest@drbdtest.com grp dltest@drbdtest.com sendToDistList

To check permission member can sending dltest@huuphan.local

$zmprov ckr dl dltest@drbdtest.com tabia@drbdtest.com sendToDistList

The output
DENIED
 
$zmprov ckr dl dltest@huuphan.local saikat@huuphan.local sendToDistList

The output
ALLOWED
Via:
    target type  : dl
    target       : dltest@drbdtest.com
    grantee type : grp
    grantee      : dltest@drbdtest.com
    right        : sendToDistList

The result

 The display, account tabia@drbdtest.com to restrict sending to distribution list dltest@drbdtest.com.

How to Restrict Sending to Distribution list



Ref:



Comments

Post a Comment

Popular posts from this blog

Cambium cnPilot E400/E410/E500 Configuration Tutorial

-
Image
Basic Connectivity:   Router (Broadband/mikrotik |dhcp enabled) >>> E400/E410/E500 + LAPTOP Cambium (Powered ON) [POE port] >>>> LAPTOP [LAN port] Step 1: Open Cambium controller in the browser. Step 2: After entering in to the site click on the Onboard Device option from Home Tab of Left Panel. Step 3: In the Onboard Option, we will get Claim Device option to adopt a Cambium AP. Step 4: Now we will move to the Cambium AP configuration Part. Below are credentials of default login access of cnpilot E400/E410/E500/E410/E500. IP:192.168.0.1 Command Line Access: Username: admin Telnet: Disabled by default Password: admin SSH: Enabled by default (on standard port: 22) ***We can also use dhcp IP to login to the cnpilot E400/E410/E500. We will get login page. Step 5: We can see several TAB on left panel. On the DashBoard Tab, we will get some overall information. Some are useful for the configuration; some are useful for troubleshoo...
Read more

Disabling Zimbra's AntiSpam, Amavis and AntiVirus filtering

-
 Check whether antispam and antivirus service is enabled currently on server using the given command zmprov -l gs <mail.example.com> | egrep -i 'serviceen|servicein'  The above command will list all the services which are currently installed and enabled on the server. Disable the antivirus and antispam services using the given commands zmprov -l ms <mail.example.com> -zimbraServiceEnabled antispam  zmprov -l ms <mail.example.com> -zimbraServiceEnabled amavis zmprov -l ms <mail.example.com> -zimbraServiceEnabled antivirus  Comment the following line in the file /opt/zimbra/postfix/conf/main.cf content_filter = smtp-amavis:[127.0.0.1]:10024  Restart services on server zmcontrol restart  Confirm that the antispam and antivirus services are disabled with the given command zmprov -l gs <mail.example.com> | egrep -i 'serviceen|servicein'  zmcontrol status 
Read more

Error "Unable to retrive Zimbra GPG key for package validation"

-
From the installation log we see: Executing: /tmp/tmp.mSlzRMclVa/gpg.1.sh --keyserver keyserver.ubuntu.com --recv-keys 9BE6ED79 gpg: requesting key 9BE6ED79 from hkp server keyserver.ubuntu.com gpg: keyserver timed out gpg: keyserver receive failed: keyserver error 1. Open port 11371 11371 tcp,udp hkp OpenPGP HTTP Keyserver 2. Force it to use port 80: gpg --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys 9BE6ED79 Ref: https://wiki.zimbra.com/wiki/Error_%22Unable_to_retrive_Zimbra_GPG_key_for_package_validation%22
Read more